AKSAD GROUP PETROCHEM
SD-0150
SD0150 is one of the styrenic terpolymer(ABS) grade with improved toughness versus HIPS grades. SD0150 exhibits,low shrinkage, and good dimensional stability. SD0150 is widely used in general injection molding applications.Use this information as a guide to aid you in selecting the proper resin for your application.
Applications
Furnitures,Automotive Parts ,General Injection Molding,Appliances Casing,Office Supplies.
Drying
Drying prior to processing is recommended in a desiccant dehumidifying hopper dryer. An inlet air dew point of -20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180° - 190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.
|
Method
|
Unit
|
Value
|
Properties
|
|
ASTM D-1238
|
GR/10MIN
|
1.8
|
MELT FLOW INDEX
(200°C/5KG)
|
|
ASTM D-256
|
KJ/M2
|
22
|
IZOD IMPACT STRENGTH
|
|
ASTM D-1525
|
℃
|
98
|
VICAT SOFTENING POINT(50N LOAD)
|
|
-
|
KG/M3
|
600
|
BULK DENSITY
|
|
ASTM D-638
|
KGF/CM2
|
450
|
TENSILE STRENGTH AT YEILD
|
|
ASTM D-785
|
R.SCALE
|
105
|
ROCKWELL HARDNESS(AT 23°C)
|
*All above mentioned data are typical values and not to be construed as real specifications.Users should confirm results by their own tests.For more information about guaranteed items, please refer to S.S.S.(Standard Sales Specifications)
Commercial Manager cell phone: +98- 912 127 45 75
DOWNLOAD